Why Won't My Iphone Charge With Other Chargers?
Asked by: Ms. Sophie Davis B.A. | Last update: April 11, 2020star rating: 4.9/5 (67 ratings)
These alerts can appear for a few reasons: Your iOS device might have a dirty or damaged charging port. Your charging accessory is defective, damaged, or isn't Apple-certified. Your USB charger isn't designed to charge devices.
Why does my iPhone only work with certain chargers?
The most common reason why this is going to happen is that the charging port inside your iPhone or Pad is dirty this can be due to dirt or pocket lint filling up the charging port ensuring the charger cannot establish a proper connection.
Can iPhone be charged with any other charger?
As long as you're using the right cable or the right wireless standard (and it's difficult not to), you can use just about any charger with your phone.
Why my phone is not charging with another charger?
One of the most common causes of charging problems is the charging port becoming clogged with dirt, dust, or debris. Dirt or lint can build up inside the charging port and prevent the charging cable from engaging properly with the charging contacts inside the port.
What do I do if my iPhone charger is plugged in but not charging?
Hard Reset Your iPhone. Sometimes the solution is as simple as hard resetting your iPhone. Check Your Lightning Cable For Damage. Try A Different iPhone Charger. Brush The Gunk Out Of Your iPhone's Charging Port. Put Your iPhone Into DFU Mode And Restore. Repair Your iPhone. .
My iPhone Won't Charge! The Real Fix From A Former Apple
15 related questions found
Why does my phone only work on some Chargers?
Dirt and debris in your phone's charger port or a faulty component are the most likely causes of intermittent charging problems on your cell phone.
Why do I have to hold my phone a certain way to charge?
Sometimes chargers just stop working, or you're using a charger that's not approved by the manufacture of the device, such as a car charger, and it has stretched the charging port on your phone a bit. Check your charger(s) and see if anything seems out of ordinary on the part that actually plugs into the phone.
Can a non-Apple charger damage my phone?
No, it's totally safe to use a non-Apple charger as long as it's rated to work perfectly with an Apple device. In fact, modern smartphones include the ability to regulate the power draw to keep the battery well-protected from overheating, thus preventing the risk of blowing up your phone by using a third-party charger.
Can I use fake iPhone charger?
If you use a counterfeit or uncertified Lightning accessory, you could see these issues: Your iOS device could become damaged. The cable might be easily damaged. The connector end might fall off, get very hot, or might not fit properly into your device.
Can I use a Samsung charger on an iPhone 13?
Conclusion: Yes, you can charge your iPhone with a Samsung power supply unit.
Why does iPhone only charge 80?
With iOS 13 and later, Optimized Battery Charging is designed to reduce the wear on your battery and improve its lifespan by reducing the time your iPhone spends fully charged. When the feature is enabled, your iPhone will delay charging past 80% in certain situations.
How do I remove the debris from my iPhone charging port?
Turn off your iPhone by going to Settings > General > Shut Down. Grab a small toothpick, or roll a paper or cotton product into a small tip. Carefully insert the tip into the port and jiggle it to loosen dirt or debris. Give the port another burst of compressed air to help remove anything you've loosened.
How do I clean a charging port?
Turn off your device and use the can of compressed air or the bulb syringe to clean out the charging port. Blast a few short bursts and see if any dust falls out. If using compressed air, make sure you're holding the can upright to avoid getting water inside the port.
How do I know if my charger port is damaged?
Signs Your Phone's Charging Port is Damaged or Broken Broken Pins in Phone Charger Port. Similarly, if pins inside the port become broken or bent, correct charging will become impossible. Debris in Phone Charger Port. Charger Cable and Adapter Work With Other Devices. Faulty Phone Charger Adapter. Defective Phone Battery. .
Can I use a regular iPhone charger for iPhone 12?
If you are planning to use the lightning-to-USB-C cable to charge the device, you can still use the old USB adapter to connect it to the charging cable and power up your device. If you have the older Wireless Charger, that too will work without any trouble with the iPhone 12 series.
How do I clean my iPhone charging port with a toothbrush?
Gently brush out any debris. Using the head of the toothbrush, carefully swipe the bristles along the charging port to remove any debris. If you observe any particles further within the charging port, use the tip/corner of the bristles to reach inside. We recommend using a scooping motion to fully clean out the port.
Why do some lightning cables not work?
iPhone chargers mainly stop working due to being old and worn out after several usage throughout time. Sometimes they can even stop working due to strain on the plastic outer layer and cause the wires to be exposed and easily susceptible to damage.
How do I clear my USB C port?
Use a Plastic Toothpick for Stubborn Debris: Don't even try to stick cotton swabs or metal objects in your phone's USB-C port. Instead, use the “toothpick” end of a plastic flosser to dig any stubborn debris out of your phone. Please be gentle doing this—don't bend the connector inside your port.
Why do I have to bend my charger to charge?
Because of the damages on the charger tip, it needs to be placed at the correct angle so that the charger tip and the socket or the charging port in your laptop can actually connect with one another and allow power to flow through from the charger to your laptop.
How can I clean my iPhone charger port without toothpick?
Using a can of compressed air, such as Falcon Dust, hold it upright and give the port a few short blasts to clear away any immediate dust. Try plugging in your iPhone afterwards to see if this has fixed the problem.
